Gen 4 Ski Doo 850 E-module Bulkhead Brace - Grip 'n Rip 1

Gen 4 E Module Brace Kit 2017 Gen 4 E-module brace kit, similar to the BRP reinforcement plate but significant advantages. 25% thicker aluminum than the BRP plate.  Open center section to allow air to flow under the motor and to the primary clutch area. BRP's plate completely blocks airflow thru this area. The plate is wider in the area where our front-end brace kit bolts thru in order to hit both bolts. If you use our front brace kit with the BRP plate one of the bolts only catches half the plate. Less expensive than a BRP plate. Comes with a template to drill the two holes thru the stock cross brace. These bolt holes are in the correct location that will line up with our front brace kit if you want to add that in the future. With BRP's reinforcement plate you need to purchase a separate drill template to locate the drill holes.  Easy bolt-on kit.   If you're a beginner, skiing your first slope in the harshest conditions imaginable is a completely different experience. You can't understand how important it is to make sure that your vehicle's body and chasis remain as sturdy as they originally were... until it's too late. Protect yourself with our Gen 4 Ski Doo 850 E-module Bulkhead Brace - Grip 'n Rip 1! With this bulkhead brace installed, you'll enjoy increased safety against damage or wear on vital parts of your chassis while driving through the toughest terrains nature designed not to be driven on (or at least made for more experienced drivers). Having this brace will give you an advantage over other snowmoblies because not only does this body part hit out weight harder.